燃烧效率仪

TPI-708燃烧效率分析仪介绍：

烟气分析仪/燃烧效率分析仪TPI708三合一气体燃烧效率分析仪除了测量O2/CO/CO2之外，还可做燃烧效率分析，并且结合微分温度计，配合印表储存之数据。TPI708开机时进行一系列的传感器检测，以确保工作正常，TPI708必须在洁净空气环境下开机，如果在开机时传感器工作不正常或没有正确归零，显示屏将显示错误信息。TPI708可存储数据50笔。

The TPI 708 Flue Gas Analyzer is a state of the art, easy to use analyzer designed not only to display and calculate the required readings from a flue but also to cover most of the other measurements associated with combustion.The instrument is ruggedly constructed and comes with a 3 Year unitand 2 Year sensor Guarantee.

The TPI 708 combustion analyzer uses state of the art electrochemical sensors. This sensor technology provides the longest lasting, most accurate and reliable means for performing combustion tests. The sensors in your analyzer will need to be replaced periodically and calibration is recommended once every year. The 708 will remind you when calibration is due by flashing “CAL DUE Err” for three seconds at start up.

Electrochemical sensors by nature are always active. Therefore the time the analyzer is off and not being used must be taken into account when determining sensor life. The sensors in your analyzer are warranted for two years. This warranty does not cover sensors damaged through misuse of the analyzer.

You should keep the batteries of your 708 fresh so power is constantly being supplied to your sensors.

The following guidelines will help prevent damage to your sensors:

• Always use the mini pump filter when testing flue gases.

• Always periodically check and replace the mini pump filter as needed.

• Always make sure the in-line filter / water trap is installed properly.

• Always periodically check and replace the in-line filter as needed.

• Always remove water or condensation from the inside of the in-line filter / water trap assembly prior to performing tests.

• Always use the optional oil filter (p/n A773) when performing tests on oil burning equipment.

• Never over saturate your sensors by performing tests on equipment with gas levels beyond the capability of you analyzer.

• Always keep the A794 water trap / filter assembly clean and replace the filter as necessary. Replacement filter part number is A794F.

The TPI 708 Flue Gas Analyzer comes complete with the following standard accessories:

• TPI 708 Instrument

• Rubber Boot (A765)

• Soft Carrying Case (A768)

• Flue Sampling Probe (A770)

• In-Line Filter assembly installed on Flue probe (A794)

• Temperature Probe (GK11M)

• Mini Pump Protection Filter Assembly and spare filters (A763)

• Exhaust Spigot (removable) (A764)

• Instruction Manual

The TPI 708 Flue Gas Analyzer has the following options available:

• Infrared printer (A740)

• Spare In-Line Filter (A794F is a package of 5 filters)

燃烧效率仪的维护保养  

1.定期的检修维护，可延长设备使用寿命。  

2.专业的调校服务，提供燃烧效率，降低开机运行成本。  

3.降低设备的突发故障，提高生产效率。  

4.提高燃气设备运行的安全性，防止出现燃气外漏和内漏（到烘箱内部），导致安全爆炸事故的发生。  

应用途径：  

1.广泛适用于各种工业燃烧设备的维护与监测（如各类锅炉等）  

2.燃烧器（燃气热水器、燃气壁挂炉等）的烟气、废气中的有毒有害气体（co、nox、so2）定量检测，以及燃烧装置的燃烧状况分析。  

3.工业应用领域中的维修工程师/锅炉调试人员。